Materials Test Station ("Luke") Operational Data

Document #:

LARTPC-doc-283-v5

Document type:

Note

Submitted by:

Terry Tope

Updated by:

Terry Tope

Document Created:

19 Jul 2007, 15:40

Contents Revised:

15 Oct 2007, 17:29

Metadata Revised:

20 May 2008, 17:21

Abstract:

This document contains instrument historical data related to the filling, operation, and emptying of the materials test station ("Luke").

Files in Document:

• "Luke" boil-off rate when half full without the vapor pump installed. (LUKE_heat_leak.pdf, 120.4 kB)
• Analysis of the filter performance in Luke 4.18.08 to 4.22.08 (comtanmination_filtering_balance_Allnumsfordocdb_1.pdf, 94.3 kB)
• Condenser liquid and vapor flow rates & vapor temperatures during 4.16.08 to 4.22.08 run (March08_run_conditions.pdf, 790.0 kB)
• Filling of "Luke" on 7.19.07, notes liquid fill rate and back pressure (LUKE_PRESSURE_VACUUM.pdf, 114.2 kB)
• Filling of "Luke" on 8.16.07 (FILLING_LUKE.pdf, 335.9 kB)
• PDF file of RTD translation thru liquid (rtd.pdf, 826.4 kB)
• Plot of historical data for the first run with the condenser operational. (LN2_SIMPLE.pdf, 338.8 kB)
• Plot that shows the rate of bulk temperature increase after a pressure increase and estimates heat leak/vaporization rate (LUKE_Tmeasured_2.pdf, 710.4 kB)
• Purge of air lock 8.16.07 to 8.17.07 (Air_lock_purge.pdf, 370.4 kB)
• Purge of air lock 8.16.07 to 8.20.07 - did not achieve 0.00 PPM as observed previously (Air_lock_purge_2.pdf, 792.5 kB)
• Word file that describes 5.16.08 to 5.20.08 (log.doc, 1.4 MB)

Topics:

• Cryogenics:Certification:Instrumentation/Controls
• Systems:Luke

Authors:

• Cary Kendziora
• Stephen Pordes
• Terry Tope